GE DS200ITXSG1A Inverter Snubber Board Turbine Control Mark V DS200

GE DS200ITXSG1A Inverter Snubber Board Turbine Control Mark V DS200

Product Details:

Description:

This DS200ITXSG1A Inverted Snubber Board is a crucial member of the Mark V Turbine Control System Series developed by General Electric, as mentioned above. With this in mind, it is important to contextualize each individual hardware component made available to the DS200ITXSG1A Inverter Snubber Board within the greater intended functionality of the Mark V Series product offering. Luckily enough for our sake, this DS200ITXSG1A Inverter Snubber Board has a plethora of available instructional manual materials detailing its specific function. The Mark V Series that this Hardware Tips and Specifications printed circuit board product offering exists as a component member of has specific applications in the control and management systems of compatible and popular wind, steam, and gas turbine automated drive assemblies, as indicated by the full extended series name attached above.

This DS200ITXSG1A PCB's greater Mark V Series, while applicable to newer-developed turbine applications, must still be considered obsolete as a whole, given the broad-scale manufacturing discontinuation that took place in one of the many years beyond its initial rollout due to a manufacturer-realized functional series obsolescence. According to these GE materials, this DS200ITXSG1A Inverter Snubber Board was specifically manufactured for use in A frame drives, as it helps to provide both dv and dt suppression for IGBT modules in IGBT-led drive assemblies. In ordered to achieve its intended functionality, this DS200ITXSG1A Inverter Snubber Board makes use of an elevated number of hardware components.

The DS200ITXSG1A is an Inverter Snubber Board developed by GE. The Inverter Snubber Board creates heat, which, if left to accumulate, might cause sensors in the drive to give an error condition in order to prevent the drive from overheating. If the drive is allowed to overheat, the electrical components or the motor may be damaged. A safety danger that results in a fire can also occur. If the drive overheats, it will automatically shut down, and you will need to take action to correct the problem. A trip condition occurs when the drive is automatically cut off to prevent an overheating condition.

The DS200ITXDG1A is a circuit board assembly manufactured by GE for use in the Speedtronic Mark V system. The MKV is one of GE's later Speedtronic systems developed to manage gas and steam turbines. It includes a fault-tolerant TMR architecture with two-out-of-three voting on key control and protection parameters. The MKV is capable of being set up in Simplex form for less complex systems and still provide fault-tolerant control through the software settings of this design. The MKV board can be purchased from AX Control as a refurbished, fully tested unit. The DS200ITXDG1A is a small board used as an IGBT snubber board. Snubbers are designed as energy absorbing circuits that dampen the voltage spike that occurs when a switch is turned on. The switch can be either electrical or mechanical. This is a secondary board that connects to the larger main board.

Mark V DS200 Inverter Snubber Board

GE DS200ITXSG1A Inverter Snubber Board

Turbine Control Inverter Snubber Board

GE DS200ITXSG1A Inverter Snubber Board Turbine Control Mark V DS200 Images